Cixi Feijie Bearing Co., Ltd.
Tel：0574-63750919 / 63753858
Email：sales@radbearings.com
Cixi Feijie Bearing Co., Ltd.
Thin-walled bearings the adoption of extremely thin bearing sections has resulted in a smaller, lighter footprint and a wider range of applications.
In order to obtain low frictional torque, high rigidity and good rotary accuracy of the bearings, small diameter steel balls are used in the product. The use of hollow shafts has resulted in light weight and a small footprint. The thin-walled bearings are available in various series, including seal forms, dust cap forms, forms with flanges, stainless steel forms, wide forms, etc.
Feijie offers a wide range of over 320 thin-walled ball bearings in metric and inch sizes in both bearing steel and stainless steel.
Deep groove ball bearings
Four point contact ball bearings
Angular contact ball bearings
Low friction torque
High rigidity
Good rotary accuracy
Light weight
Small installation space
Stepper motors, medical devices, office equipment, testing instruments, gearboxes, robots, optical imaging equipment, rotary encoders, etc.
1Ensure that the environment in and around the thin-walled bearing is clean. Even the slightest dust entering the inside of the thin-walled bearing will increase wear, vibration and noise of the thin-walled bearing.
2When mounting thin-walled bearings, absolutely no strong stamping is allowed, because the grooves of thin-walled bearings are very shallow, and the inner and outer rings are also very thin, strong stamping will lead to the separation of the inner and outer rings of the bearings and other damage. Therefore, in the installation, the first thing to do is to determine with the manufacturer to produce the installation clearance range, according to the clearance range to match the installation.
3为To prevent thin-walled bearings from rusting, make sure that the storage environment is dry and moisture-free, and that they are stored off the ground and in isolation. When taking out bearings for bearing use, be sure to wear clean gloves to avoid moisture or sweat sticking to the bearings and causing rust.
